® Pentacut™ Inserts
Iscar® and Pentacut® are registered trademarks of Iscar LTD.
and are in no way affiliated with New Market Products, LLC.
Use with CCIP Style Cartridges
Iscar ®
Part Number
Width
of
Cut
Corner
Radius
PENTA 24N200J020 0.0787" 0.0079" 0° IC908 CCPI-83787689
PENTA 24N200J020 0.0787" 0.0079" 0° IC1008 CCPI-02987790
PENTA 24N300J150 0.1181" 0.0590" 0° IC908 CCPI-83787382
PENTA 24N300J020 0.1181" 0.0079" 0° IC908 CCPI-07621568
PENTA 24N300PF020 0.1181" 0.0080" 0° IC908 CCPI-92183318
PENTA 34N300C020 0.1181" 0.0080" 0° IC908 CCPI-59788463
PENTA D40N300C020 0.1181" 0.0080" 0° IC808G CCPI-91124081
PENTA 24R200J06D 0.0787" 0.0039" 6° RH IC1008 CCPI-02987808
PENTA 24R200J15D 0.0787" 0.0039" 15° RH IC1008 CCPI-83787457
PENTA 24R200J15D 0.0787" 0.0040" 15° RH IC1008 CCPI-73446494
PENTA 34R300C06D 0.1181" 0.0080" 6° RH IC 908 CCPI-71428270
PENTA D40R300C-6D 0.1180" 0.0080" 6° RH IC808G CCPI-77912145
PENTA D40R300C-15D 0.1180" 0.0080" 15° RH IC808G CCPI-82180464
Lead
Angle
Grade
NMP
Part Number
PENTA 24N-J
For parting and precision grooving full radius insert for machining soft materials. Minimum burr size.
PENTA 24N-PF
Parting and precision grooving inserts for machining soft materials. High positive rake.
PENTA 24R-Z
Parting and precision grooving inserts for machining soft materials and bearing steel.
High positive rake.
PENTA 34N-C / PENTA 34R-C/PENTA D-N-C/PENTA D-R-C
Used for parting of bars, hard materials and tough applications at medium to high feeds. Positive rake, single cavity with a negative land and shoulders.
PENTA 24R-J
Used for the parting of tubes, small and thin-walled parts.